Influence of Semiconductor Thickness and Molecular Weight on the Charge Transport of a Naphthalenediimide-Based Copolymer in Thin-Film Transistors.

The N-type semiconducting polymer, P(NDI2OD-T2), with different molecular weights (MW=23, 72, and 250 kg/mol) was used for the fabrication of field-effect transistors (FETs) with different semiconductor layer thicknesses. FETs with semiconductor layer thicknesses from ∼15 to 50 nm exhibit similar electron mobilities (µ's) of 0.2-0.45 cm2 V(-1) s(-1). Reduction of the active film thickness led to decreased µ values; however, FETs with ∼2 and ∼5 nm thick P(NDI2OD-T2) films still exhibit substantial µ's of 0.01-0.02 and ∼10(-4) cm2 V(-1) s(-1), respectively. Interestingly, the lowest molecular weight sample (P-23, MW≈23 kg/mol, polydispersity index (PDI)=1.9) exhibited higher µ than the highest molecular weight sample (P-250, MW≈250 kg/mol, PDI=2.3) measured for thicker devices (15-50 nm). This is rather unusual behavior because typically charge carrier mobility increases with MW where improved grain-to-grain connectivity usually enhances transport events. We attribute this result to the high crystallinity of the lowest MW sample, as confirmed by differential scanning calorimetry and X-ray diffraction studies, which may (over)compensate for other effects.

Methacrylate Copolymers with Liquid Crystalline Side Chains for Organic Gate Dielectric Applications.

Polymers for all-organic field-effect transistors are under development to cope with the increasing demand for novel materials for organic electronics. Besides the semiconductor, the dielectric layer determines the efficiency of the final device. Poly(methyl methacrylate) (PMMA) is a frequently used dielectric. In this work, the chemical structure of this material was stepwise altered by incorporation of cross-linkable and/or self-organizing comonomers to improve the chemical stability and the dielectric properties. Different types of cross-linking methods were used to prevent dissolution, swelling or intermixing of the dielectric e.g. during formation processes of top electrodes or semiconducting layers. Self-organizing comonomers were expected to influence the dielectric/semiconductor interface, and moreover, to enhance the chemical resistance of the dielectric. Random copolymers were obtained by free radical and reversible addition-fragmentation chain transfer (RAFT) polymerization. With 6-[4-(4'-cyanophenyl)phenoxy]alkyl side chains having hexyl or octyl spacer, thermotropic liquid crystalline (LC) behavior and nanophase separation into smectic layers was observed, while copolymerization with methyl methacrylate induced molecular disorder. In addition to chemical, thermal and structural properties, electrical characteristics like breakdown field strength (EBD) and relative permittivity (k) were determined. The dielectric films were studied in metal-insulator-metal setups. EBD appeared to be strongly dependent on the type of electrode used and especially the ink formulation. Cross-linking of PMMA yielded an increase in EBD up to 4.0 MV/cm with Ag and 5.7 MV/cm with PEDOT: PSS electrodes because of the increased solvent resistance. The LC side chains reduce the ability for cross-linking resulting in decreased breakdown field strengths.

Melt spinning of poly(3-hydroxybutyrate) for tissue engineering using electron-beam-irradiated poly(3-hydroxybutyrate) as nucleation agent.

Electron-beam-irradiated poly(3-hydroxybutyrate) was used as a nucleating agent for poly(3-hydroxybutyrate) in a melt-spinning process. Molecular data and thermal properties of the irradiated samples were determined. The thermal properties of the nucleated melts were determined to assess the influence of the nucleation agents, and then spinning tests were carried out. Thermal and textile properties of the spun fibers were also determined. Estimations of the improvement of the crystallization in the spinline and of the inhibition of secondary crystallization in the fibers from the use of the described blood-compatible nucleation agents are given.

Melt spinning of bacterial aliphatic polyester using reactive extrusion for improvement of crystallization.

This paper reports on an attempt to use reactive extrusion with peroxide as a comfortable pathway for improvement of the crystallization of poly(3-hydroxybutyrate) in a melt spinning process. At first, rheological and thermal properties of the modified melts are determined in order to assess the effect of nucleation. Then spinning tests are carried out. Molecular weights and molecular weight distributions of the spun fibers are determined by chromatographic methods. Average crystallite size is measured by wide angle X-ray scattering. Thermal and textile properties of the spun PHB fibers are also determined. An estimation of the improvement of the crystallization in the spinline and of the inhibition of the secondary crystallization in the fibers from the use of the described way of reactive extrusion is given.

Melt spinning of poly(3-hydroxybutyrate) fibers for tissue engineering using alpha-cyclodextrin/polymer inclusion complexes as the nucleation agent.

This paper reports on an attempt to use CD and CD/PHB ICs as nucleation agents for PHB in a high-speed melt spinning process. At first rheological and thermal properties of the nucleated melts are determined in order to assess the influence of the nucleating agents. Then spinning tests are carried out. Thermal and textile properties of the spun PHB fibers are also determined. An estimation of the improvement of inhibition of the secondary crystallization from use of the described blood compatible nucleating agents is given.

Multiblock copolymers of L-lactide and trimethylene carbonate.

Sequential copolymerizations of trimethylene carbonate (TMC) and l-lactide (LLA) were performed with 2,2-dibutyl-2-stanna-1,3-oxepane as a bifunctional cyclic initiator. The block lengths were varied via the monomer/initiator and via the TMC/l-lactide ratio. The cyclic triblock copolymers were transformed in situ into multiblock copolymers by ring-opening polycondensation with sebacoyl chloride. The chemical compositions of the block copolymers were determined from (1)H NMR spectra. The formation of multiblock structures and the absence of transesterification were proven by (13)C NMR spectroscopy. Differential scanning calorimetry (DSC), wide-angle X-ray scattering (WAXS), and dynamic mechanical analysis (DMA) measurements confirmed the existence of a microphase-separated structure in the multiblock copolymers consisting of a crystalline phase of poly(LLA) blocks and an amorphous phase formed by the poly(TMC) blocks. Stress-strain measurements showed the elastomeric character of these biodegradable multiblock copolymers, particularly in copolymers having epsilon-caprolactone as comonomer in the poly(TMC) blocks.